|
|
|
|
 |
|
|
1 7/8" 2001-2004 C5 Corvette headers and 3" center section with x pipe and high flow converters. Bolt on installation with no cutting and welding required. Manufactured from 304 Stainless, the headers feature 3/8” thick, CNC laser cut flanges, and CNC mandrel bent 1 7/8” primary tubes. The headers are completely tig welded together, and have the AIR tubes and Oxygen sensors installed. The headers have shown gains of 40+ rear wheel horsepower on highly modified engines. The 1 7/8” headers are perfect for large cubic inch, forced induction, or nitrous oxide applications. Also available as part #C5LS103BT as headers only, or C5LS103ORBT with 3" x pipe.
|
|
|
|
|
Part# c5ls103catbt 01-04 Corvette C5 1 7/8” headers and 3” center section w/ X pipe and high flow converters. $1,818.50 Buy It Now
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
|
1 7/8" 2001-2004 C5 Corvette headers and 3" center section with x pipe-for off road use only-no converters. Bolt on installation with no cutting and welding required. Manufactured from 304 Stainless, the headers feature 3/8” thick, CNC laser cut flanges, and CNC mandrel bent 1 7/8” primary tubes. The headers are completely tig welded together, and have the AIR tubes and Oxygen sensors installed. The headers have shown gains of 40+ rear wheel horsepower on highly modified engines. The 1 7/8” headers are perfect for large cubic inch, forced induction, or nitrous oxide applications. Also available as part #C5LS103BT as headers only, or C5LS103CATBT with 3" high flow cats and x pipe.
|
|
|
|
|
Part# c5ls103orbt 01-04 Corvette C5 1 7/8” headers and 3” Off Road center section . $1,487.50 Buy It Now
|
|
|
|
|
|
|
|
1 7/8" 2001-2004 C5 Corvette headers and adapters to connect to factory h pipe and factory converters-cutting and welding is required. Manufactured from 304 Stainless, the headers feature 3/8” thick, CNC laser cut flanges, and CNC mandrel bent 1 7/8” primary tubes. The headers are completely tig welded together, and have the AIR tubes and Oxygen sensors installed. The headers have shown gains of 40+ rear wheel horsepower on highly modified engines. The 1 7/8” headers are perfect for large cubic inch, forced induction, or nitrous oxide applications. Also available as part #C5LS103ORBT with 3" off road center section and x pipe, or C5LS103CATBT with 3" high flow cats and x pipe.
|
|
|
|
|
Part# c5ls103bt 01-04 Corvette C5 1 7/8” headers (adapters to connect to factory H pipe & factory converters) $1,101.50 Buy It Now
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
|
|
01-04 Corvette LS1, LS6 1 3/4" 16 gauge primary tubes, cnc laser cut 3/8" flanges. Includes exhaust hookups for stock or most aftermarket exhaust systems. Up to 40 RWHP gain over stock.
|
|
|
|
|
Part# c5ls103 01-04 Corvette LS1 LS6 1 3/4” headers (exhaust hookups for stock or most aftermarket exhaust systems) $1,046.50 Buy It Now
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
|
|
05 Corvette LS2, 1 3/4" PRIMARIES, 3/8" FLANGES-W/HIGH FLOW CONVERTERS, 3" X PIPE AND CENTER SECTION. LONG TUBE DESIGN MAKES GREAT POWER AND FITS UNDERCARRIAGE PERFECTLY-THE BEST FITTING, BEST PERFORMING C6 HEADER AVAILABLE. CENTER SECTION INCLUDES ALL CLAMPS AND PIPES TO MATE TO THE FACTORY SLIP JOINT IN FRONT OF THE REAR AXLE
|
|
|
|
|
Part# c6cat 05 Corvette LS2 1 3/4” Headers and High Flow Converters $1,678.95 Buy It Now
|
|
|
|
|
|
|
|
05 Corvette LS2, 1 3/4" PRIMARIES, 3/8" FLANGES-HEADERS WITH OFF ROAD 3" X PIPE AND CENTER SECTION. LONG TUBE DESIGN MAKES GREAT POWER AND FITS UNDERCARRIAGE PERFECTLY-THE BEST FITTING, BEST PERFORMING C6 HEADER AVAILABLE. CENTER SECTION INCLUDES ALL CLAMPS AND PIPES TO MATE TO THE FACTORY SLIP JOINT IN FRONT OF THE REAR AXLE
|
|
|
|
|
Part# c6or 05 Corvette LS2 1 3/4” Headers and Off Road Pipes $1,416.45 Buy It Now
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
|
|
05 Corvette LS2, 1 3/4" PRIMARIES, 3/8" FLANGES-HEADERS ONLY-WILL REQUIRE WELDING FOR INSTALLATION. LONG TUBE DESIGN MAKES GREAT POWER AND FITS UNDERCARRIAGE PERFECTLY-THE BEST FITTING, BEST PERFORMING C6 HEADER AVAILABLE.
|
|
|
|
|
Part# c6 05 Corvette LS2 1 3/4” Headers $1,048.95 Buy It Now
|
|
|
|
|
|
|
|
1997-2004 Corvette exhaust system. CNC MANDREL BENT 2 1/2" 304 S/S. CAT BACK EXHAUST FROM THE TWO BOLT FLANGE IN FRONT OF REAR AXLE ALL THE WAY BACK. QUAD ROLLED EDGE STRAIGHT CUT TIPS (2 PER SIDE). CHAMBERED MUFFLERS DELIVER AGGRESSIVE EXHAUST TONE.
|
|
|
|
|
Part# vc5cham 1997-04 Corvette Exhaust System (1/2” 304 S/S catback) $825.50 Buy It Now
|
|
|
|
|
|
|
|
1997-2004 Corvette Center Section. CNC MANDREL BENT 3" 304 S/S. CAT BACK EXHAUST FROM THE TWO BOLT FLANGE IN FRONT OF REAR AXLE ALL THE WAY BACK. DUAL 4" SLASH CUT ROLLED EDGE TIPS.
|
|
|
|
|
Part# vc53cb 1997-04 Corvette Center Section (3” 403 S/S catback exhaust) $838.95 Buy It Now
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
|
|
2005 CORVETTE CAT BACK EXHAUST. 2 1/2" CNC MANDREL BENT WITH DUAL TURBO MUFFLERS-FACTORY "BIG BLOCK" SOUND THAT IS MELLOW AT CRUISE. DUAL SLASH CUT ROLLED EDGE TIPS. CAN BE ORDERED WITH WIDE OVAL TIPS OR DOUBLE WALL STRAIGHT CUT TIPS.-ADD WO FOR WIDE OVAL OR DW TO END OF PART NUMBER
|
|
|
|
|
Part# c6cb 05 Corvette exhaust System (2 1/2” CNC Mandrel Bent) | | |
