|
|
|
|
 |
|
|
* Brass Water Filter * Stainless Steel Re-Useable fittings * Hose can be shortened with a Dremel Tool * 1 Gallon Tank * Low Fluid Light * 15 Feet of Stainless/Teflon Hose * SHIPS WITH OUR NEW BLACK PUMP!!
|
|
|
Price: $599.95
|
|
Price: $99.95
|
|
|
|
 |
|
Price: $199.95
|
|
|
|
|
|
The vari-cool coolingmist controller is the controller in which all others will judged. Coolingmist has set the standard as we re-invented the controller. The Vari-Cool Coolingmist Controller has a MIN, MAX and TUNE Knob. The Min is your starting point. You can set this between 1 and 30. The Max is your Full Pressure Point, the Tune is your curve. If you set the Min to 6, the max to 20 and the tune to 1, you will get a linear curve from 6 to max at 20. If you adjust the Tune higher, you will get a more aggressive tune. With 10 pre-programmed maps, coolingmist could have just stopped there and called it a day. But as with our other products we will never rest just because we are better. We want to stay on top, to do that we decided to make it a fully programmable unit. We are the first and only methanol injection company to have a fully programmable progressive controller. You can hook the unit to your laptop or PC (requires battery power source) and change the parameters. You can make your own maps. For example, you can make position 1 for street driving, 2 for track, 3 for when you are on high boost, etc.
|
|
|
|
|
|
This system injects based on boost. An adjustable 1-25 psi boost switch is included. Get this while its in stock, this deal will not last! Included is the following: 15 feet black hose High quality 2 quart tank with heavy duty screw on lid Tap for the tank primary wire relay relay harness 100 psi pump. fittings for pump, checkvalve custom brass checkvalve All Fittings are Brass 1-25 psi boost switch various electrical components.
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
|
This is for those of you that have a pump and your own hose already.This is a convenient way to get the hard to find parts and our exclusive brass checkvalve.This kit contains: * 45 psi cracking pressure checkvalve Or 12V solenoid You will get the following also: * 16 gauge primary wire * Injector holder ,* Injector brass water filter ,* 1-25 PSI boost pressure switch (adjustable) ,* 12V relay ,* Relay Harness , * Fuse Holder ,* Fuse: This does not come with a pump, fittings or various other items. It assumes you have those already.
|
|
|
|
This is a Genuine Nordskog Air temp gauge. Its 2 and 1/16th inch. This comes with a nordskog lifetime warranty. This gauge is dead accurate and really cool looking. The sender is included it is a 1/8th NPT sytle sender
|
|
|
|
|
|
Order phone # 440-543-2590
|
|
|
|
|
|
These intake temp gauges are the same as our Farenheight version except they have programming and LED to display in Farenheight. The range is roughly 0-100F. These will be in stock by the 15th of April. These are selling fast and we only have 10 units on the first batch. If you want one, order ASAP. When you choose your color and bezel options we will serve these on a first come first serve basis. If we are out of the LED color or Bezel style you want (in otherwords if we have 4 coming in that style and we already have them pre-sold) we will notify you and see if you want to cancel or change your order). This is the best deal around. Included in the price is the sender which is a 1/8th NPT standard tap
|
|
|
|
These boost pressure switches are very compact and small enough to fit anywhere. They have both Normally open and Normally closed contacts so they can turn on or off any device. Choose your range from the drop down list. These are rated at 10 AMPS so you dont need a relay for most applications. These are adjustable with a 5/64 hex wrench (we sell them if you need one).These switches are 1-25 psi adjustable. You will notice that coolingmist is the only company to carry this style switch in a 1-25 psi range. All other companies make you choose between a 1-4, 4-15 and a 15-60 range.
|
| |
